Most chimney fires occur due to a build-up of creosote, a tarry by-product if burning wood. Have your chimney flue cleaned before each heating season. Burn only dry, well-seasoned, hardwood to reduce creosote accumulation.
pes of extinguishing agents. Most fire extinguishers display symbols to show the kind of fire on which they are to be used. There are also multi-purpose fire extinguishers – such as those labeled “B-C” or “A-B-C” – that can be used on two or more of the below type fires.
Types of Fire Extinguishers
- Class A extinguishers put out fires in ordinary combustible materials such as cloth, wood, rubber, paper, and many plastics. Ordinary Combustibles
- Class B extinguishers are used on fires involving flammable liquids, such as grease, gasoline, oil, and oil-based paints. Flammable Liquids
- Class C extinguishers are suitable for use on fires involving appliances, tools, or other equipment that is electrically energized or plugged in. Electrical Equipment
- Class D extinguishers are designed for use on flammable metals and are often specific for the type of metal in question. These are typically found only in factories working with these metals. Combustible Metals
- Class K fire extinguishers are intended for use on fires that involve vegetable oils, animal oils, or fats in cooking appliances. These extinguishers are generally found in commercial kitchens, such as those found in restaurants, cafeterias, and caterers. Class K extinguishers are now finding their way into the residential market for use in kitchens. Combustible Cooking
2. Is the fire at a point where it might still be controlled by a fire extinguisher?
Portable fire extinguishers are valuable for immediate use on small fires. They contain a limited amount of extinguishing material and need to be properly used so that this material is not wasted. For example, when a pan initially catches fire, it may be safe to turn off the burner, place a lid on the pan, and use an extinguisher. By the time the fire has spread, however, these actions will not be adequate. Only trained firefighters can safely extinguish such fires.
Use a fire extinguisher only if:
- You have alerted other occupants and someone has called the fire department;
- The fire is small and contained to a single object, such as a wastebasket;
- You are safe from the toxic smoke produced by the fire;
- You have a means of escape identified and the fire is not between you and the escape route; and
- Your instincts tell you that it is safe to use an extinguisher.
If all of these conditions are not present, you should NOT try to use a fire extinguisher. Alert other occupants, leave the building following your home escape plan, go to the agreed upon meeting place, and call the fire department from a cell phone or a neighbor’s home.
3. Am I physically capable of using the extinguisher?
Some people have physical limitations that might diminish or eliminate their ability to properly use a fire extinguisher. People with disabilities, older adults, or children may find that an extinguisher is too heavy to handle or it may be too difficult for them to exert the necessary pressure to operate the extinguisher.
Maintenance & Training
- The extinguisher is not blocked by furniture, doorways, or any thing that might limit access in an emergency.
- The pressure is at the recommended level. Some extinguishers have gauges that indicate when the pressure is too high or too low.
- All parts are operable and not damaged or restricted in any way. Make sure hoses and nozzles are free of insects or debris. There should not be any signs of damage or abuse, such as dents or rust, on the extinguisher.
- The outside of the extinguisher is clean. Remove any oil or grease that might accumulate on the exterior.
- Shake dry chemical extinguishers once a month to prevent the powder from settling or packing. Check the manufacturer’s recommendations.
- Pressure test the extinguisher (a process called hydrostatic testing) after a number of years to ensure that the cylinder is safe to use. Find out from the owner’s manual, the label, or the manufacturer when an extinguisher may need this type of testing.
- Immediately replace the extinguisher if it needs recharging or is damaged in any way.
Sound Decision Making. Training. and Maintenance are required to safely control a fire with an extinguisher. For this reason, USFA recommends that only those trained in the proper use and maintenance of fire extinguishers consider using them when appropriate. Contact your local fire department for information on training in your area.
*Information taken from US Fire Administration: http://www.usfa.fema.gov